Showing posts with label Caterpillar. Show all posts
Showing posts with label Caterpillar. Show all posts
Sunday, April 7, 2013
992G Boom Failure
From Oxford Mining, Kentucky, USA. A Caterpillar 992G with a seriously broken boom 68,000 hours on the machine.
Sunday, December 30, 2012
Sunday, November 18, 2012
Bogged Excavator
Sent in this week by a reader. According to the email, the excavator operator decided to take a shortcut by going over the rill.
Sunday, August 12, 2012
Lightning Strike on 777
Another great set of photos sent in by a reader of a lightning strike on a 777. From the incident report:
"On July 15, 2012 at approximately 2300 hours driver of 777F haul truck was parked at the 1135 waste dump waiting out an electrical storm. Truck was struck by lightning causing significant damage to the rear of the truck. One left side outside duel was propelled away from the truck approximate 250 meters. The rim of this tire was another 50 meters further. All 4 rear tires were blown out and cab windows shattered. Driver exited the truck as quickly as he could and ran away to a safe distance from the truck."
"Driver exited the truck as quickly as he could." Gee, ya think?
Sunday, July 15, 2012
793 vs Drill Rig
Received these photos a couple of weeks ago, but with no description or location. Judging by the marks behind the truck, it looked like it might have just come around a corner.
Sunday, January 22, 2012
Downshifting in a 793
Lots of people send it photos to this blog. (Thank you!). Normally, I check them to see if I already have them in my collection, and then put them into
the rotation. Sometimes, the photos are so amazing that I just have to put
them up on the site right away.
This is one of those times. These photos were sent in this week by a reader. In it, he says that the operator of this 793 downshifted from sixth gear to first. The engine didn't like it. Some rebuilding of the engine may be necessary.
This is one of those times. These photos were sent in this week by a reader. In it, he says that the operator of this 793 downshifted from sixth gear to first. The engine didn't like it. Some rebuilding of the engine may be necessary.
Sunday, November 13, 2011
Sunday, October 30, 2011
Hole Punch
How do you punch a perfect hole into a truck tyre? Like this:
This was done by the Hope Downs mine, on one of their 777 water trucks.
Sunday, November 21, 2010
Sunday, October 25, 2009
Sunday, September 27, 2009
Komatsu 930 vs Caterpillar 16H
Sunday, August 16, 2009
Subscribe to:
Posts (Atom)